Made in the USA
Handy tool that compresses valve springs for quicker, easier camshaft, valve seal, valve spring, or retainer service
You don't have to remove the head from the engine first
OEM-approved tool
Used with a 3/8 inch ratchet or breaker bar
Works on 1991-2004 Ford vehicles with 4.6L, two-valve, V8 engines; 4.6 4V, 5.4 V8 and 6.8 V10
Assembled in the USA
Designed for use of servicing valve cores in R134a and R12 systems
Universal valve core remover/installer for standard, JRA, Eaton and GM large bore valve cores
Access and change valve cores while the A/C system is still filled with refrigerant
Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no refrigerant lossU.S. assembled and tested
Quick and easy way to test for moisture content in the brake fluid; results appear in seconds
LED light indicators show percentage of water in the brake fluid
Calibrated for cars using DOT 4 brake fluid only (found in most cars produced since 2006)
Made in the USA
12” OAL with a straight blade for all striking applications
Patented, two-composite, ergonomically designed handle provides a comfortable and secure grip and is oil, solvent, and temperature resistant
Metal striking cap at the end of the handle is in direct contact with the shaft allowing the user to strike the tool without damaging the handle
Black oxide finish for additional rust protection
Ultra Bright UV/Blue LED Light
6 Levels of Sensitivity (15 Levels of Detection)
Tri-Colored Visual Leak Level Indicator
Meets SAE J1627 and CE Conformity
Detects all refrigerants (CFC's, HCFC's, HFC's)
Included adapters work interchangeably with banana plugs on the 2 x 15-ft. retractable test leads
Used for testing electrical circuits in cars, trailers, boats, etc.
15-ft. wire allows you to connect the leads under the hood and test from the driver’s seat
Use with any multimeter, or other device, equipped with standard banana jack connectors
Retractable test leads pull out and stay at desired length
Universal design allows tool to fit fuel tank lock rings on Ford Chrysler and GM vehicles
Tool easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit
Used with a 1/2" drive ratchet or breaker bar
Lifetime limited warranty
Channel design on body allows 2 interchangeable sets of legs to adjust to fit rings from 4" to 7-1/4" and keeps the drive centered.
Works on the smaller GM serrated rings and traditional rings. New leg set works on many 2004 and newer vehicles including Ford F150, Chevrolet pickups, Chrysler/Dodge mini vans, PT Cruiser, Dakota and Durango.
Design is compact so the tool is not left hanging over the work area with the potential of hitting other components.
Made in USA
Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary.
Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually.
Use with an air hammer.
Includes blow molded storage case.
PROUDLY AMERICAN MADE
Attaches to any power drill; Recommended operating speed not to exceed 2500 rpm;
Light weight; Right angle drill weighs 1/3 of a pound and rotates 360 degrees for tight-spot access
Threaded components allow for fast, easy tool changes; Drill over, under or around obstructions
Design allows "deep reach" in confined areas; Provides utility of extension drill bit set
Made in USA
This set includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs
The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage
Works on soft steel and aluminum oil pans with 1/2 inch, 12 mm and 14 mm threads
Can be used on the vehicle when room permits
Made in the USA with a Lifetime Warranty
Used for a multitude of applications, such as removing gaskets, rust, paint, carbon buildup, and floor tile
Blades are ground for a sharp edge and can be resharpened after heavy use to RETURN the cutting edge to its original sharpness
Capped end allows for striking without damaging the handle
The patented, two-composite handle is ergonomically designed, providing superior comfort & grip
Hardened and tempered alloy steel that is black oxide finish for additional rust protection
Made in USA
Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet
Air is applied through one adapter to show the presence of leaks within the system
Six pairs of stepped adapters to fit most turbo systems on cars and light trucks
Can also be used on some cooling system hoses
Includes pressure gauge, shut off valve and pressure regulator.
Variable speed switch controls motor speed from 950 to 1650 RPM
(2) Built in grounded receptacles have the ability to run other equipment
Versatile allows for use in a variety of applications both indoor and outdoor
Create a cooler and cleaner air flow in work stations allowing equipment to work faster and more efficiently
Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most applications.
Dual 2-1/2" gauges feature chrome bezel and rugged protective outer boot.
Scales read 0-100 psi and 0-700 kPa.
Pressure regulated manifold includes quick couplers.
Long flex 24" 14 mm hose.
10 mm, 12 mm and 18 mm thread adapters.
Made in the USA
Low Profile, 6 Point Wrench with Offset 3/8" Square Drive for Clearance in Hard-to-Reach Spaces
Size is laser marked on each wrench.
Comes with a blow molded Case for storage.
Use on oil and fuel filter canisters when replacing the filter element.
Smaller sockets are 7/8" hex and larger socket is 1.25" hex to fit eight common domestic and foreign antenna nuts
Made of heat-treated alloy steel for durability
Complete applications are listed on enclosed card
Sockets are also available individually
Heavy Duty 60, 000 PSI Ductile Iron Castings
6. 5” Wide Jaws
7” Jaw Opening (11” when reversed)
4” Throat Depth (3” when reversed)
1/8” – 3. 5” Pipe Jaw Capacity
360 degree swivel base
Gear type locking system with double lock down bolts
Two Anvils: Lower: 3. 4" x 3. 6" Upper: 6. 5" x 2. 2"
4" Extra Deep Sockets for removal and installation of automotive bumpers
6 Point Hex
Made of bright chrome finished chrome vanadium
Set Includes: 8 mm, 10 mm, 11 mm, 12 mm, & 14 mm
Rotating jaw inserts for reliably gripping hose
Clamps in all positions and a locking Device for Simple and secure work on Clamps under tension without Effort
Push button feature, adjust pliers once and stays set allowing user to access 19 adjustment positions for optimum adaption to different sizes of work pieces
Easy access to the work piece due to the Slim size of the head and joint area with a Working capacity of 2-3/4"
German chrome vanadium electric steel, forged, Oil hardened
Slim head design; narrow head fits into confined spaces
