Posts tagged Specialty Tools
Master Cam Tool Kit for Ford® Vehicles
 

TOOL TRUCK EQUIVALENT: $1675

OTC: $670

Warranty: None Listed

Equivalent Tool: Master Cam Tool Kit for Ford® Vehicles

Description:

OTC's Ford Master Cam Tool Kit allows technicians to adjust cam timing on most 1991 and up Ford car, truck and SUV engines that utilize a timing chain or timing belt

Contains 40 tools to ensure correct cam timing when servicing timing belts, chains, head gaskets, or other valve train repairs

Covers L4, V6, V8, and V10 engines with 2V, 3V, and 4V valve configurations from model years 1991 to 2014 (and later on some models)Included reference manual walks you through the cam timing procedures with helpful tips and calls out the adapters used; manual reference numbers are etched on each adapter for ease of identification

Rugged blow molded plastic storage case keeps tools protected and contained when not in use; case is embossed with tool numbers for easy placement of tools into the case

Snap On/Blue PointTTRSpecialty Tools
6 Pc Tap Extractor Set
 

tool truck equivalent: $167

Walton: $108

Warranty: None Listed

EQUIVALENT TOOL: Tap Extractor

Description:

Made in the USA

Used to remove 4 flute taps

Used to remove broken machine screw and hand taps, pipe taps, and STI taps

Extractors allow you to remove broken taps without drilling, lasers, damage threads, or scrapping parts.

Hardened steel fingers fit in the flutes of broken taps to back it out.

Snap On/Blue Point, Made in USATTRSpecialty Tools, Tap & Die Sets, Extraction Tools
Window Holder
 

TOOL TRUCK EQUIVALENT: $34

Lisle: $13

Warranty: None Listed

equivalent tool:Window Holder

Description:

Holds Door Glass While Working on Window Regulator.

Works on all cars and trucks with a top door frame.

Simply loop cable over door frame and attach suction cups to each side of glass.

Window glass is then securely held above the door while work is performed.

Snap On/Blue PointTTRSpecialty Tools
Spark Plug Insert Installer Set
 

TOOL TRUCK EQUIVALENT: $575

CalVan Tools: $252

Warranty: None Listed

Equivalent Tool: Spark Plug Insert Installer Set

Description:

Assembled in the USA

Designed to aide in repairing Two Valve Ford Modular Cylinders Heads. A quality, foolproof repair system that is cost effective and fast

High quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer

Total labor time as short as 25 mins, For use on 4.6L, 5.4L and 6.8 V-10 Ford Triton Two Valve Engines

For use on years 1996 to 2003, Part No. 389-100 Replacement Inserts

Insert size: m14-1.25, Patented

Ford spark plug insert installer designed to aide in repairing ford modular cylinder heads

Quality, foolproof repair system that is fast, cost effective and simple to use

Snap On/Blue Point, Made in USATTRSpecialty Tools
Wireless Chassis Ear
 

Tool Truck Equivalent: $430

Steelman: $270

WARRANTY: 90 Day Limited Warranty

Equivalent Tool: Wireless Chassis Ear

Description:

Noise Detection - Detect the source or squeaks, rattles, and other errant or troublesome noises throughout a car or truck's chassis

50 Ft Range - Noises can be transmitted up to 50-feet from the transmitter to the receiver allowing use on small and large vehicles

Built in Speaker - Listen to noises with the built-in speaker or with headphones through the 3.5mm jack

Signal Strength Indicator - LED lights indicate signal strength of the active channel

Illuminated Channel Buttons - Illuminated buttons indicate the active channels and can be changed or muted with a quick push

MatcoTTRSpecialty Tools
GM/Chrysler Harmonic Damper Pulley Puller
 

TOOL TRUCK EQUIVALENT: $160

Schley Products: $87

Warranty: 1 Year

Equivalent Tool: Harmonic Dampener Pulley Puller

Description:

Spring loaded legs for leg position retention

Gives greater ease and control when installing the puller in confined areas

Remove the harmonic damper pulley found on many Chrysler and GM engines

Eliminates the time consuming process of removing the radiator or other components on Autos, Pickups, SUV's and vans

Snap On/Blue PointTTRSpecialty Tools
Valve Spring Compressor Tool for Ford® Vehicles
 

TOOL TRUCK EQUIVALENT: $243

OTC: $79

Warranty: None Listed

Equivalent Tool: Valve Spring Compressor Tool for Ford® Vehicles

Description:

Made in the USA

Handy tool that compresses valve springs for quicker, easier camshaft, valve seal, valve spring, or retainer service

You don't have to remove the head from the engine first

OEM-approved tool

Used with a 3/8 inch ratchet or breaker bar

Works on 1991-2004 Ford vehicles with 4.6L, two-valve, V8 engines; 4.6 4V, 5.4 V8 and 6.8 V10

Snap On/Blue Point, Made in USATTRSpecialty Tools, Valvetrain Tools
90° Angle Drill Kit
 

TOOL TRUCK EQUIVALENT: $185

Tight Fit: $56

Warranty: 1 Year Limited

Equivalent Tool: 90° Angle Drill Kit

Description:

PROUDLY AMERICAN MADE

Attaches to any power drill; Recommended operating speed not to exceed 2500 rpm;

Light weight; Right angle drill weighs 1/3 of a pound and rotates 360 degrees for tight-spot access

Threaded components allow for fast, easy tool changes; Drill over, under or around obstructions

Design allows "deep reach" in confined areas; Provides utility of extension drill bit set

Snap On/Blue PointTTRSpecialty Tools, Drill Bits
Oil Pan Rethreading Kit
 

TOOL TRUCK EQUIVALENT: $250

Lisle: $115

Warranty: Limited Lifetime

Equivalent Tool: Oil Pan Rethreading Kit

Description:

Made in USA

This set includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs

The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage

Works on soft steel and aluminum oil pans with 1/2 inch, 12 mm and 14 mm threads

Can be used on the vehicle when room permits

Matco, Made in USATTRSpecialty Tools, Oil System Tools
Master Fuel Injection Pressure Test Kit
 

Tool Truck Equivalent: $630

Lisle: $328

Warranty: Limited Lifetime

EQUIVALENT TOOL: Master Fuel Injection Pressure Test Kit

Description:

Made in USA

Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet

Air is applied through one adapter to show the presence of leaks within the system

Six pairs of stepped adapters to fit most turbo systems on cars and light trucks

Can also be used on some cooling system hoses

Includes pressure gauge, shut off valve and pressure regulator.

Mac, Made in USATTRSpecialty Tools, Diagnostic Tools, Fuel System Tools
Cylinder Leakage Tester Kit
 

TOOL TRUCK EQUIVALENT: $180

OTC: $89

Warranty: None Listed

Equivalent Tool: Cylinder Leakage Tester Kit

Description:

Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most applications.

Dual 2-1/2" gauges feature chrome bezel and rugged protective outer boot.

Scales read 0-100 psi and 0-700 kPa.

Pressure regulated manifold includes quick couplers.

Long flex 24" 14 mm hose.

10 mm, 12 mm and 18 mm thread adapters.

MatcoTTRSpecialty Tools, Diagnostic Tools
3 Pc Duramax Flywheel Lock Kit
 

Tool Truck Equivalent: $69

Lisle: $40

Warranty: Limited Lifetime

Equivalent Tool: 3 Pc Duramax Flywheel Lock Kit

Description:

Made in USA

Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement

Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation

Package dimension is 4.5 inches width by 5 inches height by 2 inches depth

MacTTRSpecialty Tools
UNIVERSAL HYDRAULIC FLARING KIT
 

TOOL TRUCK EQUIVALENT: $650

Master Cool: $339

Warranty: 1 Year

Equivalent tool: UNIVERSAL HYDRAULIC FLARING KIT

Description:

Tube and die set stabilizing arm for easy tube forming

Magnetic adapter holder keeps adapters in place

Equipped with an enlarged die set compression area for better grip of dies

This tool can be used on "Annealed Steel" & "Dead Soft".Create perfect production quality flares on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft cooper tubing

Includes Mastercool 70027 mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O.D. tubing (1/8 to 1/2" nominal)

MatcoTTRBrake Tools, Specialty Tools